Specifications For the Use Of Edge Milling Machines

Specifications For the Use Of Edge Milling Machines

Edge Milling Machine

An edge milling machine is a kind of welding auxiliary equipment that adopts high-speed milling with a cutter head.

  • cheap price
  • low energy consumption
  • high smoothness

An edge milling machine is a kind of welding auxiliary equipment that adopts high-speed milling with a cutter head. It is specially used for welding auxiliary equipment to make weld grooves for steel plates before welding. Steel plate milling machine, etc. Widely used in boiler, pressure vessel manufacturing industry, shipbuilding, electric power, petroleum, chemical machinery, and construction machinery manufacturing, can process all kinds of medium and low carbon steel plate, stainless steel plate, and aluminum plate before welding bevel, straight edge and "U" shape Groove, etc.

Edge milling machine|Edge milling equipment

Edge milling machines are widely used in the production of spiral welded pipes with their significant advantages. Compared with the disc shear, the edge milling machine improves the processing quality of the plate edge, makes the forming and welding process more stable, reduces the consumption of the plate, and improves production safety. However, the edge milling process also has inherent shortcomings. If the control is not good, it will lead to a series of forming and welding defects, such as pores, slag inclusion, incomplete penetration, burning collapse, welding deviation, irregular welding bead, etc. Therefore, the use of milling should be standardized. side machine.

1. Reasonable selection of milling process and parameters

The milling process is reasonably selected according to the actual production situation. Under the condition of guaranteeing production, try to adopt a single edge milling process and choose type I groove, to reduce edge milling defects and make it easy to process. Select the appropriate working width, generally, choose the milling amount of 8-10mm. That is, the working width of milling = the narrowest actual original plate width - 8mm.

2. Flexible adjustment of the milling machine

In specific cases, the edge milling machine can be flexibly adjusted to suit different situations. For example, when the deviation of the working width of the steel plate is 1-3mm, the forming quality is generally not affected; when the edge of the steel plate deviates from the delivery line by 1-3mm, it can be controlled. Therefore, when the steel plate is about to be de-milled out of control, it can be controlled by fine-tuning the headstock. Another situation is: if the width of some steel coils is not too large, the working width of the edge milling machine can be fine-tuned to reduce the amount of blade milling and prolong its service life.

3. Standard use and blade replacement

The edge milling machine must be regularly lubricated and maintained to ensure the integrity and stability of the equipment. Coated blades with better wear resistance and better heat dissipation must be selected and replaced in time and regularly. It should be noted that the milling cutter disc pursues the overall effect. If only some of the blades are replaced, it will cause "metal wire" defects and increase the working strength of other blades. Therefore, all the blades must be replaced when changing tools.

Safety precautions for edge milling machines

1. Please disconnect the power supply before maintenance, electrical and rotating parts have the potential to cause serious personal injury or property damage

2. Check sockets, wires, and machines for signs of damage before each use!

3. Before installation, wiring, startup, operation, or any operation, please use this manual as a guide to identify each part of the equipment.

4. Do not move the unit with the power cord!

5. If the machine is used outdoors, please use the tripped circuit breaker to protect the machine!

6. Electrical wiring installation and maintenance personnel must have the qualifications specified in the regulations to ensure personal and property damage.

7. When cleaning iron filings, you must stop and wear gloves to avoid high temperature and sharp iron filings damage!

8. Please always place the power cord behind the machine body, do not place the power cord on sharp objects!

Edge Milling Machine

An edge milling machine is a kind of welding auxiliary equipment that adopts high-speed milling with a cutter head.

You might want to search...
  • welding rotator

  • welding positioner

  • wind tower production line