What is a welding rotator? It is a frictional ability achieved by the accessories, which can effectively ensure that the rollers are on the same axis for a long time. It is not easy to deform during the rotation process, and it can effectively reduce slippage. This welding equipment does have a good effect on the industry, but many factories have many problems with the installation and maintenance of the welding rotator. FENGWEI These questions will be answered one by one for you.
When installing the welding rotator, you should first look at the length of the laying. In addition, you must ensure that the base and the plane are in a parallel state. During the layout process, the dust at the bottom must be cleaned up. If there are impurities, the same is true. It will affect normal use in the future. After all, this is done, the universal wheel should be installed. After installation, it must be tested to see if it can be rotated. At least it should be rotated 90 degrees. If so, you can choose to tighten it to achieve a fixed effect.
Maintenance of welding rotator
Welding rotator can effectively reduce the deformation of the tool during use, and it is not easy to slip, so it can effectively improve the efficiency of work, but even if it has a good advantage, in daily use The process also needs to pay attention to maintenance.
When the welding rotator is being maintained, it should first check the surrounding environment, such as whether it is idling under the power-on state, or whether it is in a state of noise for a long time, and at the same time, it should also be checked. Whether the connecting screw is loose, if there is looseness, it must be repaired as soon as possible, otherwise, it will have an impact on the daily use process, and also need to check whether there is any abnormal phenomenon in the rotation of the roller, and also need to ensure that it is in use During the process, it has the characteristics of rainproof, moistureproof and dustproof. Try not to use it in the case of severe vibration, and you should not put some corrosive objects on the equipment.
The use of welding rotators has already penetrated various industries, but if the regulations are not strictly followed in the process of use, it is easy to cause potential safety hazards, so first of all, it should be adjusted correctly according to the length of the equipment, it must not be If there is contact with sharp objects, serious damage will be caused, and if the equipment enters the operation stage without being fixed, it is very likely that the entire machine will be overturned, which is very likely to cause casualties, so attention must be paid.